The M2M Wireless Communicators are web-to-wireless remote monitoring and communication devices. An internal wireless modem provides two-way communications to the automated M2M operations center and the www.m2mcomm.com web site. These models provide very wide spread coverage throughout North America and the entire world - often with no requirement for a local cellular account.
Secure & Private Labeled Web Site
Operation is very simple
1. Connect the M2M Communicator to the device(s) to be monitored and turn it on. Set up the values to be read from and written to the device.
2. The M2M device will automatically establish two-way communications over the wireless network to the www.m2mcomm.com web site.
3. Log onto your private page on the web site or call the toll-free number from any telephone to:
Check the last reported status of your equipment - switch positions, diagnostic information, tank levels, temperature, pressure, number of pulses received….
• |
Request an up-to-date report from the unit.
|
• |
Turn connected equipment on or off, or change a setting. |
• |
Configure selected events to trigger an immediate user notification by voice phone or e-mail. |
Their small size and low cost make the M2M Communications products suitable for a wide variety of general monitoring applications.
Product Models
M222 - The M222 Series of Web-to-Wireless Communicators are ideal for Remote Control, Load Shedding, and Demand Side Management projects. The M222 provides up to 2 digital inputs, 2 analog inputs and 2 control outputs in one box.
It can also operate in a RF Master / Slave network with up to 8 digital inputs, 8 analog inputs and 8 control outputs
M844 - The M844 Series of Web-to-Wireless Communicators are ideal for Remote Control, Load Shedding, and Demand Side Management projects. The M844 provides up to 8 digital inputs, 4 analog inputs and 4 control outputs in one box .
M2000 - Monitors and controls other Intelligent Electronic Devices (IEDs) using a Modbus port.
M2500 - Directly monitors 10 digital inputs, which can be configured as alarms, counters, or counter/timers. There is no Modbus port.
M2510 - Combines the M2000 and M2500.
M3000 - Monitors up to 10 digital inputs, which can be dry contacts or 120 VAC inputs. The M3000 can also monitor up to 3 analog inputs and has 3 remote control relays.
K322 Fuel Selection Module / Automated Meter Reading System for Demand Side Management
Download Accessory Checklist (.pdf file, 35K Bytes)
|
